Experiments

Controlled experiments

The probes show what happens on real networks, where many things change at once. Experiments change one thing on purpose — packet loss, delay, a blocked protocol — between two servers we control, and measure what each VPN protocol still does. Every experiment publishes its scripts and raw results so it can be repeated.

Published experiments1
Planned3
Scripts and raw dataGitHub →

Published

4 Oct 2026

Can It Survive? #1 — packet loss

Four VPN protocols between two servers while the network drops 0, 1, 5 and 10 % of packets in both directions. Download speed and page-load times, three runs each.

Packet loss4 protocolsPublishedReproducible

Download speed kept under packet loss

Axis 0–100 %Loss levels: categories

0%25%50%75%100%0 %1 %5 %10 %Packet loss, each direction
Data table
Speed kept0 % loss1 % loss5 % loss10 % loss
No VPN100%97%88%77%
Hysteria2100%96%91%47%
VLESS Reality100%97%90%78%
WireGuard100%48%15%4%
OpenVPN (UDP)100%28%12%4%

Planned

Planned · no results yet

UDP blocked

The same protocols on a network that drops all UDP, as some networks do wholesale: which transports still connect, and how quickly an app falls back to one that does.

Planned · no results yet

High latency (1000 ms)

A very slow round trip, as on satellite links or badly congested routes: handshakes, page loads and download speed per protocol.

Planned · no results yet

Throttled LTE profile

A mobile network that throttles bandwidth and varies delay and loss over time, closer to a real congested cell than fixed settings.

Scripts and raw data

All experiment scripts, configurations and raw results are available on GitHub.

github.com/colitu/vpn-lab →
How experiments differ from probes

Experiments run between controlled servers and change one network variable at a time. They are separate from the continuous measurements; they do not feed the success rates on the other pages.

Reproducibility principles
  • Scripts and configurations are published
  • Raw results are published
  • Experiments can be repeated by others
  • Setup and parameters are documented on each experiment page